Processor - HP ProDesk 600 Maintenance And Service Manual

Processor

Description
Intel Core i7 processor
4770, 3.4 GHz, 8-MB L3 cache, 86W
Intel Core i5 processors
4670, 3.4 GHz, 6-MB L3 cache, 86W
4570, 3.2 GHz, 6-MB L3 cache, 86W
1.
Prepare the computer for disassembly
2.
Remove the access panel
3. Remove the fan sink
4. Rotate the locking lever to its full open position (1).
5. Raise and rotate the microprocessor retainer to its fully open position (2).
6. Carefully lift the processor from the socket (3).
CAUTION:
handling them could cause irreparable damage. Once pins are damaged it may be necessary to
replace the system board.
The heat sink must be installed within 24 hours of installing the processor to prevent damage to
the processor's solder connections.
72 Chapter 5 Removal and replacement procedures: Tower (TWR)
(Access panel on page
(Fan sink on page
Do NOT handle the pins in the processor socket. These pins are very fragile and
(Preparation for disassembly on page
38).
70).
Spare part number
727373-001
727381-001
727380-001
37).