Processor - HP ProDesk 680 G4 PCI MT Maintenance And Service Manual

Processor

NOTE: The processor spare park kit includes replacement thermal material.
Follow these steps to remove the fan-sink:
1. Prepare the computer for disassembly (see
following components:
2. Remove the access panel (see
a. Front bezel (see
b. Drive cage (see
c. Fan-sink (see
Remove the processor:
1. Depress the processor release lever (1), and then slide the lever to the right until it clears the locking clip.
2. Swing the processor release lever (2) up and back as far as it will go.
3. Swing the processor retention bracket (3) up and back as far as it will go.
Preparation for disassembly on page
Access panel on page
Front bezel on page 34)
Drive cage on page 38)
Fan-sink on page 46)
30), and then remove the following components:
29), and then remove the
Processor 47