Dell PowerConnect B-RX Configuration Manual page 107

FIGURE 4
Synchronized at startup
or switchover
Also can be immediately
synchronized using the CLI
Startup-config also
automatically updated
with write memory
command
The BigIron RX Series system allows you to do the following related to file synchronization:
•
•
The following sections explain how to perform these tasks.
Comparing and synchronizing files
You can initiate a comparison of the flash code, system-config file, and running-config file on the
active management module with the same files on the standby module and synchronize the files
immediately if differences exist. When you synchronize the files, the active module copies its files
to the standby module, replacing the files on the standby module.
BigIron RX Series Configuration Guide
53-1002253-01
Active and standby management module file synchronization
Flash code
Flash code
Compare files on the active module with files on the standby module and immediately
synchronize any files that are different.
Immediately synchronize all files between the active and standby modules.
Managing management module redundancy
Automatically synchronized
at regular, user-configurable
intervals
Also can be immediately
synchronized using the CLI
Active Management Module
Running-config file
Startup-config file
Standby Management Module
Running-config file
Startup-config file
Not synchronized
Boot code
Boot code
3
31