Choose Color Temp - FujiFilm FinePix S5 Pro Owner's Manual

CHOOSE COLOR TEMP.

For taking a picture in daylight without flash or artificial
light, such as taking a landscape, you can specify color
temperature to set white balance. When
COLOR TEMP. is selected for the white balance setting,
you can specify color temperature by specifying a
numeric value. When taking a picture with flash or
fluorescent light, select dFLASH mode or
FLUORESCENT mode respectively.
Z Setting the color temparture in the [SHOOTING
MENU]
WHITE BALANCE WHITE BALANCE
FLUORESCENT LAMP-5 FLUORESCENT LAMP-5
FINE FINE
FLASH FLASH
SHADE SHADE
CHOOSE COLOR TEMP. CHOOSE COLOR TEMP.
PRESET CUSTOM 1 PRESET CUSTOM 1
A Select the [
CHOOSE COLOR TEMP.] under [T
WHITE BALANCE] in the [SHOOTING MENU].
See "Setting the [SHOOTING MENU]" (➝p.108).
B Press n or o to select the desired color
temperature.
C Press MENU/OK.
CHOOSE
7700K 7700K
7100K 7100K
6700K 6700K
6300K 6300K
5900K 5900K
5600K 5600K
Z Setting the color temperature using WB and the
command dials
A While pressing WB, rotate the main-command dial until
is displayed in the control panel.
B While pressing WB, rotate the sub-command dial until
the desired value is displayed.
MEMO
• The camera may not produce the desired white
balance, even when the numeric value measured by an
external color temperature meter is applied on the
camera. Take a test shot to determine if the selected
value is appropriate to the light source.
97