FujiFilm FinePix S5 Pro Owner's Manual page 141

FOCUS AREA
SELECTION
BILT-IN AF-ASSIST
S EXPOSURE
AE LOCK
ISO AUTO CONTROL
EV CONTROL STEPS
EXP COMP/FINE
TUNE
EASY EXPOSURE
COMP.
CENTER-WEIGHT
AREA
FINE TUNE
EXPOSURE
Factory default
*
Specifies using the "wrap around" function when pressing the multi-
*
WRAP / NO WRAP
selector in order to select the focus area.
Sets the built-in AF-assist illuminator to light for assisting focus when the
ON * / OFF
subject is poorly lit.
Specifies how to lock exposure.
R/A:RELEASE/AE-L /
A:AE-L ONLY *
Activates the ISO auto control function when ISO sensitivity adjustment
ISO AUTO CONTROL /
is needed for optimal exposure. The maximum ISO value can be
MAX.SENSITIVITY /
selected. This function also can be used with the flash.
MIN.SHUTTER
SPEED
Specifies the EV steps for exposure setting (includes shutter speed,
1/3 EV STEP * / 1/2 EV
aperture and AE bracketing).
STEP / 1 EV STEP
1/3 EV STEP * / 1/2 EV Specifies the increment for exposure compensation and fine-tuning.
STEP / 1 EV STEP
Sets the exposure compensation adjustment by rotating the command
TEMPORARY / ON /
dials without using the D.
OFF *
Sets the size of diameter for metering in the center-weighted metering
AVERAGE / 13mm /
mode. [AVERAGE] is the average metering value of the entire frame.
10mm / 8mm * /
6mm
MATRIX METERING Optimizes exposure by choosing a standardized level for each metering
(–1 to +1) / CENTER- mode. This setting is not affected by two-button reset.
WEIGHTED (–1 to +1) /
SPOT MERERING (–1
to +1)
How to use the SET UP menu (➝p.138)
Continued Q
154
154
154
154
156
156
157
157
157
141