Preset White Balance - FujiFilm FinePix S5 Pro Owner's Manual

Preset White Balance

Use this function to set the correct white balance for a light
source. You can also use this function to achieve a
desired special effect.
Z Setting the preset white balance in the [SHOOTING
MENU]
A Set the focus-mode selector to M (manual).
WHITE BALANCE WHITE BALANCE
FLUORESCENT LAMP-5 FLUORESCENT LAMP-5
FINE FINE
FLASH FLASH
SHADE SHADE
CHOOSE COLOR TEMP. CHOOSE COLOR TEMP.
PRESET CUSTOM 1 PRESET CUSTOM 1
B Select one of the ] PRESET CUSTOM items under
[T WHITE BALANCE] in the [SHOOTING MENU].
See "Setting the [SHOOTING MENU]" (➝p.108).
C Press n or o to select [NEW WB].
D Press q.
PRESET CUSTOM 1 PRESET CUSTOM 1
NEW WB NEW WB
NEW WB NEW WB
OK OK
CANCEL CANCEL
E Hold up a sheet of white paper, reflectivity
of 18% grey card, etc., under the target
light source. Frame the white balance
reference object in the center of the
viewfinder. Then press the shutter button.
COMPLETED! COMPLETED!
SET SET
F If the exposure is measured correctly,
"COMPLETED!" appears on the LCD
monitor.
Check that the white balance reference
object fills the
monitor. Press MENU/OK to confirm the
setting.
Z When the exposure is not measured correctly
OVER: The subject is too bright. Use a negative (–)
exposure compensation value and set the white
balance again.
UNDER: The subject is too dark. Use a positive (+)
exposure compensation value and set the white
balance again.
CANCEL CANCEL
area on the LCD
Continued Q
99