Evf/Lcd Boost Setting; Auto Power Off Temp - FujiFilm X-S20 Owner's Manual

EVF/LCD BOOST SETTING

Adjust the behavior of the EVF and LCD monitor when BOOST is
selected for PERFORMANCE.
Option Option
EVF/LCD LOW LIGHT
PRIORITY
EVF/LCD RESOLUTION
PRIORITY
EVF FRAME RATE
PRIORITY (100P)

AUTO POWER OFF TEMP.

If its temperature rises beyond a certain point, the camera will fi rst
display a message and then, if the temperature rise continues, auto-
matically end shooting and power down. Choose the temperature
at which the camera turns off automatically.
Option Option
STANDARD
HIGH
9
302
Display brightness is adjusted to make subjects in shad-
ows easier to see. Motion blur may cause ghosting.
Display resolution is increased to make details easier to
see.
The refresh rate for the EVF is increased, smoothing mo-
tion.
The camera turns off automatically when its temperature
reaches the STANDARD value.
Shooting can continue at temperatures higher than
the STANDARD value, extending the time available to
record movies and the like. Because remaining in contact
with the camera at these high temperatures could result
in low-temperature burns, this option should only be
used after mounting the camera on a tripod or taking
other steps to avoid prolonged contact with the camera.
POWER MANAGEMENT
Description Description
Description Description