FujiFilm FinePix S5 Pro Owner's Manual page 124

Non-CPU Lenses
Z Setting the maximum aperture using the FUNC.
button and sub-command dial
A Select [FV LOCK/LENS DATA] for [FUNC. BUTTON]
under [ BUTTON ASSIGNMENT] in the [SET UP]
menu (➝p.168).
B Display the maximum aperture of attached lens by
rotaing the sub-command dial while pressing the
FUNC. button.
MEMO
• If the built-in flash, Nikon Speedlight SB-800, or SB-600
are used, the FV lock is activated, the lens focal length
cannot be set. If the built-in flash is raised, close it. If the
Speedlight is attached, turn it off.
• If the correct focal length is not listed, choose the
closest value greater than the actual focal length of the
lens.
• Lens data is not adjusted when a non-CPU lens is
zoomed in or out. After changing the zoom position,
select new values for the lens focal length and
maximum aperture.
• Selecting a focal length sets maximum aperture to the
last value selected at that focal length.
124