FujiFilm FinePix S5 Pro Owner's Manual page 168

U SET UP
FUNC. BUTTON
This option controls the function performed by the FUNC.
button.
[FV LOCK]
If built-in flash or Nikon CLS-compatible Speedlight is
used, flash value locks when FUNC. button is pressed.
Press again to cancel FV lock.
[FV LOCK/LENS DATA]
Same as above, except that if built-in flash is lowered
or Nikon CLS-compatible Speedlight is not attached,
use the FUNC. button and command dials to specify
focal length and aperture of non-CPU lenses (➝p.122,
123).
[1 STEP Tv/Av]
If FUNC. button is pressed when rotating command
dials, changes to shutter speed (exposure modes S
and M) and aperture (exposure modes A and M) are
made in increments of 1 EV.
[SAME AS AE-L/AF-L]
FUNC. button performs same functions as AE-L/AF-L
button.
[FLASH OFF]
Flash will not fire in photos taken while FUNC. button
is pressed.
[BRACKETING BURST]
While FUNC. button is pressed, all shots in exposure
or flash bracketing program will be taken each time the
shutter button is pressed. In continuous high-speed
and continuous low-speed modes, camera will repeat
bracketing burst while the shutter button is held down.
[MATRIX METERING]
Matrix metering activated while FUNC. button is
pressed.
168
How to use the SET UP menu (➝p.138)
[CENTER–WEIGHTED]
Center-weighted metering activated while FUNC.
button is pressed.
[SPOT METERING]
Spot metering activated while FUNC. button is
pressed.
[FOCUS AREA FRAME]
Press FUNC. button and rotate sub-command dial to
cycle between normal and wide focus areas (➝p.57).