FujiFilm FinePix S5 Pro Owner's Manual page 89

*7 Available only if non-CPU lens is used without specifying lens data in the [NON-CPU LENS DATA] (➝p.121) under [
MISC.] in the [SET UP] menu.
*8 Select [1/250(AUTO FP)] for the [FLASH SYNC SPEED] (➝p.158) under [
Not available if built-in flash fires.
*9 Available only when SB-800 is used as master flash or Nikon SU-800 wireless Speedlight commander is used.
*10Available with AF CPU lenses only.
The following Speedlights can be used in non-TTL auto and manual modes. If they are set to TTL, the shutter button will lock
and no photographs can be taken.
Speedlight
Flash mode/feature
A Non-TTL auto
M Manual
Repeating flash
REAR Rear-curtain sync
*1 When an SB-27 is mounted on the FinePix S5 Pro, the flash mode is automatically set to TTL, and the shutter-release will
be disabled. Set the SB-27 to A (non-TTL auto flash).
*2 Autofocus is only available with AF-Micro lenses (60 mm, 105 mm, or 200 mm).
CAUTION
Flash attachments made by manufacturers other than Nikon
Use only Nikon Speedlights. Negative voltages or voltages over 250 V applied to the accessory shoe could not only prevent normal
operation, but damage the sync circuitry of the camera or flash.
SB-80DX, SB-28DX, SB-28,
SB-26, SB-25, SB-24
✔
✔
✔
✔
FLASH/BKT] in the [SET UP] menu.
*2
SB-50DX, SB-23, SB-29 ,
SB-21B *2 , SB-29S *2
—
✔
—
✔
*1
SB-30, SB-27 , SB-22S,
SB-22, SB-20, SB-16B, SB-15
✔
✔
—
✔
Continued Q
89