FujiFilm FinePix S5 Pro Owner's Manual page 174

U SET UP
[MENUS AND PLAYBACK]
Controls functions performed by command dials during
playback or when menus are displayed.
Select [MENUS AND PLAYBACK] and press q on the
multi-selector. Press no to change the setting.
COMMAND DIALS COMMAND DIALS
ROTATE DIRECTION ROTATE DIRECTION
CHANGE MAIN/SUB CHANGE MAIN/SUB
APERTURE SETTING APERTURE SETTING
MENUS AND PLAYBACK MENUS AND PLAYBACK
[ON]
Main-command dial performs same function as
pressing multi-selector left or right. Sub-command dial
performs same function as pressing multi-selector up
or down. Note that this option has no effect on the roles
played by the command dials during playback zoom.
[OFF]
Multi-selector used to choose picture displayed,
highlight thumbnails, and navigate menus.
• Single-frame playback: the main-command dial is used
to display additional photo information, or to zoom in on
an image. The sub-command dial is used to choose a
picture to display.
• Multi-frame playback: the main-command dial moves
the cursor up or down, the sub-command dial moves the
cursor left or right.
• Menu navigation: main-command dial moves highlight
bar up or down.
Rotate sub-command dial to right to display sub-menu,
to left to return to previous menu.
174
HELP HELP
NORMAL NORMAL
OFF OFF
SUB SUB
ON ON
OFF OFF
How to use the SET UP menu (➝p.138)
BUTTON AND DIAL
This option allows adjustments that are normally made by
pressing the MODE, D, BKT, d, ISO, QUAL, or WB
button and rotating a command dial to be made by
rotating the command dial after the button is released.
[DEFAULT]
Changes to settings made by rotating command dial
while button is held down.
[HOLD]
Settings can be changed by rotating command dial
after button is released. To exit, press button again,
press the shutter button halfway, or wait for about 20 s.
TEST-SHOOTING (NO CARD)
This option can be used to disable the shutter release
when no memory card is inserted in the camera. The
default setting allows the shutter to be released without a
memory card inserted in the camera.
[OFF]
Shutter button disabled when no memory card is
inserted.
[ON]
Shutter button enabled when no memory card is
inserted.
Photographs taken when no memory card is inserted
are not saved, although they will be displayed in the
LCD monitor.