Display - FujiFilm FinePix S5 Pro Owner's Manual

SHOOTING SPEED
Choose the rate (2 frames/s or 1 frame/s) at which
pictures can be taken in continuous low-speed mode.
MEMO
The frame advance rate may drop at slow shutter speeds
and at [ D-RANGE] setting other than [100% (STD)].
EXPOSURE DELAY MODE
Select [ON] to delay shutter release until about 0.4 s after
the shutter button is pressed, reducing camera shake in
situations in which the least camera movement could
result in blurred photographs (for example, microscope
photography).
SELF-TIMER
See p.101 for details.
QUICK PREVIEW DATA
Normally, select [ON] to playback images quickly in the
LCD monitor (or [OFF] to playback images slowly). With
any software application, If you encounter some
difficulties with playback or printing of images with [ON]
selected, select [OFF].
How to use the SET UP menu (➝p.138)

DISPLAY

IMAGE DISPLAY
Use this setting to specify how to display images on the
LCD after shooting in order to check the result.
[CONTINUOUS]
The results are always displayed after you shoot. Then
images are automatically recorded.
Press the shutter button or MENU/OK to take another
picture.
[4 SEC], [2 SEC]
The image appears for about 4 or 2 seconds and is
then recorded.
[OFF]
The photographed image is automatically recorded
without being displayed.
ILLUMINATION
This option controls the control panel backlight (LCD
illuminator).
[OFF]
Control panel illuminates only while power switch is
rotated to position.
[ON]
Backlight stays lit (note that this increases battery
drain).
149