Flow Of Sending Operations - Canon imageRunner 2020 Facsimile Manual

Flow of Sending Operations

This section describes the flow of basic sending operations.
NOTE
•
Before using the Fax mode, it is useful to read the following topics:
- Main power and control panel power (See Chapter 1, "Before You Start Using This
Machine," in the Reference Guide.)
- Routine maintenance (See Chapter 7, "Routine Maintenance," in the Reference Guide.)
•
The maximum number of send jobs that the machine handle is 70. However, the actual
number of send jobs that the machine can handle may be fewer than 70, if multiple
documents are being sent at the same time.
•
You can print a report that contains the results of all send jobs. (See "Printing the Activity
Report," on p. 5-6.)
1
Press the appropriate keys in accordance with the messages
displayed on the LCD display.
● If there are no messages displayed, proceed to the next step.
● If the message <INSERT CONTROL CARD> appears:
❑
Insert a control card into the optional Card Reader-E1.

Flow of Sending Operations

1
1-27