8 [Administration] Tab Page
Configuring the EWB function
You can configure the EWB (Embedded Web Browser) function which displays web pages on the control panel from the
[EWB] submenu under the [Setup] menu.
The EWB function is available only when the External Interface Enabler is installed on this equipment.
P.252 "Registering a server"
P.253 "Deleting a server"
Registering a server
1
Start TopAccess access policy mode.
P.22 "Access Policy Mode"
2
Click the [Administration] tab.
3
Click the [Setup] menu and [EWB] submenu.
The EWB submenu page is displayed.
4
To register a server for the EWB function, enter the server address and then click
[Add].
The server is registered.
To register more than one server, repeat this procedure.
5
Click [Save] on the [EWB] submenu.
252
[Setup] How to Set and How to Operate