Setting Up Ftp Client - Oki MC780f User Manual

8 [Administration] Tab Page
Item name
6 Account Name
Enter the account name without the domain name when [NTLM/SPA] or [Kerberos] is selected in the [Authentication] option.
7 Password
8 Scan Rate
9 Port Number
10 SSL Port Number
11 POP3 Client Connection
Timeout(1-180)

Setting up FTP Client

In FTP Client, you can specify the default port number used for the Save as file using the FTP protocol.
1
2
Item name
1 SSL Setting
2 Default Port Number
162 [Setup] Item List
Enter the account name for this equipment to access the POP3 server. You can enter up to
96 alphanumerical characters and symbols other than =, ; (semicolon), #, and \ (backslash).
Enter the password for this equipment to access the POP3 server. You can enter up to 96
alphanumerical characters and symbols other than =, ; (semicolon), #, and \ (backslash).
Enter how often this equipment should access the POP3 server for new messages. You can
enter a value in the range from 0 to 4096. "5" is set as the default.
Enter the port number to access the POP3 server. The SSL port number depends on the
port setting in the POP3 server. You can enter a value in the range from 1 to 65535.
Generally the default value "110" is used.
Enter the port number to access the POP3 server using SSL. The SSL port number
depends on the port setting in the POP3 server. Generally "995" is used.
Enter a timeout period for quitting communication when no response is received from the
POP3 server. Specify within the range from 1 to 180 seconds. "30" is set as the default.
Specify the certificate used in the SSL.
Disable — Select this to disable the SSL.
Verify with imported CA certification(s) — Select this to use the registered
certificate(s).
Accept all certificates without CA — Select this to use all certificates.
Enter the port number to access the FTP site. The port number depends on the port setting
in the FTP site. You can enter a value in the range from 1 to 65535. Generally the default
value "21" is used.
Description
Description