Setting Up Ipp Print - Oki MC780f User Manual

8.[Administration] Tab Page

Setting up IPP Print

In IPP Print, you can set the IPP Print options to enable the IPP print service.
1
2
3
4
5
6
7
8
9
10
11
Item name
1 Enable IPP
2 Port80 Enable
3 Port Number
When the same port number as the secondary one in the HTTP setting (SSL port number when SSL in the HTTP setting is
enabled) is selected, you cannot access TopAccess or the e-Filing web utility. If you set it by mistake, use the control panel of
the equipment to change the HTTP setting and enter the correct port number.
4 URL
5 Enable SSL
When the SSL is enabled, users can print to the IPP print port using the SSL. To print to the IPP print port using the SSL,
specify the following URL for the IPP print port.
https://<IP Address>:<SSL Port Number>/Print
Example: https://192.168.53.204:443/Print
Not all operating systems support SSL for all protocols.
6 SSL Port Number
When the same port number as the secondary one in the HTTP setting (SSL port number when SSL in the HTTP setting is
enabled) is selected, you cannot access TopAccess or the e-Filing web utility. If you make a mistake, use the control panel of
the equipment to change the HTTP setting and enter the correct port number.
7 SSL URL
8 Printer Name
9 Authentication
When IPP printing is used for printing from a Macintosh computer, do not enable the authentication. The Mac OS does not
support the authentication for IPP printing.
Enable or disable the IPP print service. [Enable] is set as the default.
Enable or disable Port80 for IPP printing. Port631 is usually used for IPP access so users
must specify the IPP port to the URL, i.e. "http://<IP address or DNS name>:631/Print", for
the IPP port. When this is enabled, this equipment allows IPP access through the Port80,
which is the default port for the HTTP access so users do not have to specify the port
number in the IPP port, i.e. "http://<IP address or DNS name>/Print". [Disable] is set as the
default.
If enabling the IPP, enter the IPP port number. You can enter a value in the range from 1 to
65535. Generally the default value "631" is used.
Display the URL for IPP printing. You cannot change the SSL URL for IPP printing. This SSL
URL should be set as the print port when users set up the printer driver for IPP printing if the
SSL for IPP printing is enabled.
Enable or disable SSL for IPP printing. [Disable] is set as the default.
Enter the port number for SSL. You can enter a value in the range from 1 to 65535.
Generally the default value "443" is used.
Display the SSL URL for IPP printing. You cannot change the SSL URL for IPP printing. This
SSL URL should be set as the print port when users set up the printer driver for IPP printing
if the SSL for IPP printing is enabled.
Enter the printer name for IPP printing. You can enter up to 127 alphanumerical characters
and symbols other than =, ; (semicolon), #, and \ (backslash). The MFP name is set as the
default.
Enable or disable the authentication for creating the IPP queue on the client computers.
When this is enabled, the dialog box to enter a user name and password will be displayed
when a user creates the IPP print port.
Disable — Select this to disable the authentication.
Basic — Select this to enable the authentication.
8 [Administration] Tab Page
Description
[Setup] Item List 207