Setting Up Appletalk; Setting Up Bonjour - Oki MC780f User Manual

8.[Administration] Tab Page

Setting up AppleTalk

You can set the protocol to enable communication over AppleTalk. AppleTalk must be configured to enable AppleTalk
printing from Macintosh computers.
1
2
3
Item name
1 Enable Apple Talk
2 Device Name
3 Desired Zone

Setting up Bonjour

In Bonjour, you can enable or disable the Bonjour networking that is available for Mac OS X.
1
2
3
Item name
1 Enable Bonjour
2 Link-Local Host Name
3 Service Name
Select whether the AppleTalk protocol is enabled or disabled. Enable this when configuring
AppleTalk printing. [Disable] is set as the default.
Enter the device name of the equipment that will be displayed in the AppleTalk network. You
can enter up to 32 alphanumerical characters and symbols other than =, ; (semicolon), #,
and \ (backslash).
Enter the zone name where the equipment will connect — if required. You can enter up to 32
alphanumerical characters and symbols other than =, ; (semicolon), #, and \ (backslash).
The equipment will connect to the default zone if you enter "*".
Select whether Bonjour is enabled or disabled. [Enable] is set as the default.
Enter the DNS host name of this equipment. You can enter up to 127 alphanumerical
characters and symbols other than =, ; (semicolon), #, and \ (backslash).
Enter the device name of this equipment that will be displayed in the Bonjour network. You
can enter up to 63 alphanumerical characters and symbols other than =, ; (semicolon), #,
and \ (backslash).
8 [Administration] Tab Page
Description
Description
[Setup] Item List 149