Setting Up Print Service Settings - Oki MC780f User Manual

8.[Administration] Tab Page

Setting up Print Service settings

You can configure print services such as Raw TCP Print, LPD Print, IPP Print, FTP Print, NetWare Print, and Email Print
from the [Print Service] submenu under the [Setup] menu.
Some settings may not be reflected on the touch panel immediately after saving them. The settings will be updated by
pressing the [RESET] button on the control panel or after an Auto Clear time period.
Setting the Print Service settings
1
Start TopAccess access policy mode.
P.22 "Access Policy Mode"
2
Click the [Administration] tab.
3
Click the [Setup] menu and [Print Service] submenu.
The Print Service submenu page is displayed.
4
In the Print Service submenu page, set the Print Service settings as required.
You can set the following in this page.
P.206 "Setting up Raw TCP Print"
P.206 "Setting up LPD Print"
P.207 "Setting up IPP Print"
P.208 "Setting up FTP Print"
P.208 "Setting up NetWare Print"
P.209 "Setting up Email Print"
5
Click [Save].
The confirmation dialog box appears.
When you click [Cancel] before saving the setting changes, they will not be saved and will return to the current
settings. Note that they will not be returned to the factory default by clicking [Cancel]. This can only clear the
changes and restore the current settings before saving the changes.
8 [Administration] Tab Page
[Setup] How to Set and How to Operate 241