Table of Contents
Advertisement
4.10 CM7 Common Tasks
Covered in this section are common tasks used in stores:
1. Escaping out of a menu or sub-menu.
2. Adding new product items.
3. Storing menu items in product buttons.
4. Temperature conversion from F to C.
4.10.1 Escape Menu Items
To escape from MENUS or SUB-MENUS, press the
27).
4.10.2 Adding New Product Items to the Menu
To add a new product to the menu:
1. With the computer OFF, enter Program mode by pressing the
UNLOCK button once (see Figure 28).
The computer displays PROGRAM.
2. With the desired selection displayed, press the
29).
The computer displays ENTER Code and sounds an audible alert.
3. Enter 1650 (see Figure 30).
The computer displays program MODE changing to SETPOINT TEMPERATURE.
4. Press the
(1) button to continue (see Figure 31).
Computer displays TEMP on the left and a temperature on the right.
5. Enter the desired cooking temperature using the
number buttons 0-9 (see Figure 32).
(2) button (Figure
(1) button (see Figure
1
6
5
Figure 30
4-12
Figure 27
Figure 28
Figure 29
0
(1650)
Figure 31
Figure 32
Advertisement
Table of Contents
