Frymaster Protector Series Installation & Operation Manual page 34

Protector series gas fryers footprint pro series
Hide thumbs Also See for Protector Series:
Table of Contents

Advertisement

16. Use the 3and 4buttons (see Figure 19) to toggle between elec and
gas.
17. With the desired selection displayed, press the
20).
The computer displays VAT type on the left and SPLIT on the right.
18. Use the 3and 4buttons (see Figure 21) to toggle between split and
full.
19. With the desired selection displayed, press the
22).
The computer displays Oil SYSTEM on the left and JIB on the right.
20. Use the 3and 4buttons (see Figure 23) to toggle between jib and
bulk.
NOTE: A JIB system uses a disposable JIB (Jug in a Box). A BULK system has large storage oil
tanks that are connected to the fryer.
21. With the desired selection displayed, press the
24).
The computer displays TEMPERATURE on the left and F on the right.
22. Use the 3and 4buttons (see Figure 25) to toggle between F and C
temperature scales.
NOTE: F is used for Fahrenheit, C is used for Celsius.
23. With the desired selection displayed, press the
The computer displays FRYER Setup for three seconds then off.
(1) button (see Figure
(1) button (see Figure
(1) button (see Figure
(1) button (see Figure 26).
4-11
Figure 19
Figure 20
Figure 21
Figure 22
Figure 23
Figure 24
Figure 25
Figure 26

Advertisement

Table of Contents
loading

This manual is also suitable for:

Protector

Table of Contents