Table of Contents
Advertisement
1. Open the cabinet and slide the JIB from
the cabinet (see Figure 5).
Figure 5
3. With the jug upright remove the cap and
foil seal (see Figure 7).
Figure 7
WARNING:
HOT or USED oil to a JIB.
3.5.4
Bulk Oil Systems
If using a bulk oil system, see manufacturer's instructions for filling JIB and oil disposal.
Do not add
WARNING:
Do not add HOT or
USED oil to a JIB.
2. Remove the cap and pour any remaining oil in the
container into all fry vats equally (see Figure 6).
4. Put the tube in the new full container (see Figure 8).
5. Slide the JIB onto the shelf inside the fryer cabinet
(as seen in Figure 5).
6. Press the JIB reset switch to turn the JIB LED off
(see Figure 9).
3-6
Figure 6
Figure 8
Figure 9
Advertisement
Table of Contents
