Table of Contents
Advertisement
Enter Number
• Clear Developer
Purpose:
To rotate the developer motor and stir the toner in the toner cartridge.
• Toner Refresh
Purpose:
To use up a toner cartridge when you need to replace it before the end of its life, or to stir the toner in
a new toner cartridge.
Values:
Yellow
Magenta
Cyan
Black
• BTR Refresh
Purpose:
Specify whether to execute counter measures for curling/separating discharge of the paper.
Values:
Off*
On
• Chart
Purpose:
To print various charts that can be used for diagnosing your printer.
Values:
Ghost
4Colors
Alignment
Drum Refresh
Enter
0, 0, 0*
Specifies lateral (perpendicular to paper feed direction) color
(Y,M,C)
adjustment values individually for Y (Yellow), M (Magenta)
-5 – +5
and C (Cyan).
Enter
0, 0, 0*
Specifies process (paper feed direction) color adjustment
(LY,LM,L
values individually for LY (Left Yellow), LM (Left Magenta)
-5 – +5
C)
and LC (Left Cyan).
Enter
0, 0, 0*
Specifies process (paper feed direction) color adjustment
(RY,RM,
values individually for RY (Right Yellow), RM (Right
-5 – +5
RC)
Magenta) and RC (Right Cyan).
Cleans the toner in the yellow toner cartridge.
Cleans the toner in the magenta toner cartridge.
Cleans the toner in the cyan toner cartridge.
Cleans the toner in the black toner cartridge.
Does not automatically execute counter measures for
curling/separating discharge of the paper.
Automatically executes counter measures for curling/separating
discharge of the paper.
Prints a chart to check for ghost printing.
Prints bands of yellow, magenta, cyan, and black with varying
density.
Prints a chart, and then check for proper alignment of the print
image on the paper.
Prints a chart to check the light fatigue of the drum cartridge.
Using the Operator Panel Menus
176
Advertisement
Table of Contents
