Resetting to Factory Defaults
After executing Initialize NVM and rebooting the printer, all the menu parameters or data, except
the parameters for the network are reset to their factory default values.
1
Press the
(Menu) button.
2
Select Admin Menu, and then press the
3
Select Maintenance Mode, and then press the
4
Select Initialize NVM, and then press the
5
Ensure that Are you sure? appears, and then press the
initializing the Non-Volatile Memory (NVM).
6
When the Initialized. message appears, turn off and then on the printer to apply the
settings.
183
Using the Operator Panel Menus
button.
button.
button.
button. The printer starts