Table of Contents
Advertisement
• Ethernet Cable
1
Select Ethernet Cable, and then click Next.
2
Follow the instructions, and then click Next.
The Printer Setup Utility screen appears.
3
Select the printer to be configured in the Select Printer screen, and then click Next.
NOTE:
•
If the printer to be configured is not listed in the Select Printer screen, try the following steps:
-
Click Refresh to update the information.
-
Click Enter IP Address, and then enter the IP address of your printer.
4
Enter the SSID.
5
Select Type of wireless network.
6
Configure the security setting, and then click Next.
The IP Address Settings screen appears.
7
Select IP Mode depending on your network scheme.
When IPv4 is selected:
•
Configure the following:
Select Type.
a
Enter the following items:
b
•
IP Address of your printer
•
Network Mask
Network Basics
76
Advertisement
Table of Contents
