Adjust Colorregi; Clear Developer - Fuji Xerox DocuPrint CP215 Series User Manual

• Adjust ColorRegi

Purpose:
To specify whether to manually adjust color registration.
Color registration adjustments need to be made during the initial setup of the printer or when the
printer is moved to a different location.
NOTE:
• The Adjust ColorRegi feature can be configured when Auto Regi Adj is set to Off.
Values:
Auto Adjust
Color Regi
Chart
Enter Number

• Clear Developer

Purpose:
To rotate the developer motor and stir the toner in the toner cartridge.
• Toner Refresh
Purpose:
To use up a toner cartridge when you need to replace it before the end of its life, or to stir the toner in
a new toner cartridge.
Values:
Yellow
Magenta
Cyan
Black
Automatically corrects color registration.
Prints a color registration chart. The color registration chart prints a lattice pattern of
yellow, magenta, and cyan lines. On the chart, find the values on the right side that
are next to the line that is perfectly straight for each of the three colors. If the value
for this line is 0, color registration is not needed. If the value for this line is any value
other than 0, specify the adjustment values under Enter Number.
Enter (Y, M, C)
Enter (LY, LM, LC) 0, 0, 0* Specifies process (paper feed direction) color
Enter (RY, RM, RC) 0, 0, 0* Specifies process (paper feed direction) color
Cleans the toner in the yellow toner cartridge.
Cleans the toner in the magenta toner cartridge.
Cleans the toner in the cyan toner cartridge.
Cleans the toner in the black toner cartridge.
0, 0, 0* Specifies lateral (perpendicular to paper feed
direction) color adjustment values individually
-5 – +5
for Y (Yellow), M (Magenta) and C (Cyan).
adjustment values individually for LY (Left
-5 – +5
Yellow), LM (Left Magenta) and LC (Left
Cyan).
adjustment values individually for RY (Right
-5 – +5
Yellow), RM (Right Magenta) and RC (Right
Cyan).
Using the Operator Panel Menus 163