Table of Contents
Advertisement
a user-specified print media is loaded in the PSI, you must specify the paper size setting by using
the print driver.
NOTE:
•
For more information about setting the paper size and type on the print driver, refer to the online Help provided
for the print driver.
Loading Envelope in the Priority Sheet Inserter (PSI)
NOTE:
•
Be sure to fully insert the envelope until it stops. Otherwise, print media that is loaded on the MPF will be fed.
•
When you print on envelopes, be sure to specify the envelope setting on the print driver. If not specified, the
print image will be rotated 180 degrees.
• When Loading # 10, DL, Monarch, Yougata 4, or Younaga 3
Load the envelope with the side to be printed on facing up, the flap side facing down, and the flap
turned to the right.
Printing Basics
136
Advertisement
Table of Contents
