Port9100
WSD
SNMP
Email Alerts
InternetServices
Bonjour (mDNS)
• Host Access List
Purpose:
To control the access from the specified IP addresses. The change becomes effective after the printer
is turned off and then on.
Values:
No.1-5/Address
No.1-5/Mask
No.1-5/Mode
• Reset Defaults
Purpose:
To initialize wired network data stored in Non-Volatile Memory (NVM). After executing this function and
rebooting the printer, all wired network settings are reset to their default values.
• Wireless LAN (DocuPrint CP205 w Only)
Purpose:
To enable the wireless connection.
Values:
Enable*
Disable
Disable
Disables the Port9100 port.
Enable*
Enables the Port9100 port.
Disable
Disables the WSD port.
Enable*
Enables the WSD port.
Disable
Disables the Simple Network Management Protocol (SNMP)
UDP port.
Enable*
Enables the SNMP UDP port.
Disable
Disables the Email Alerts feature.
Enable*
Enables the Email Alerts feature.
Disable
Disables an access to CentreWare Internet Services
embedded in the printer.
Enable*
Enables an access to CentreWare Internet Services
embedded in the printer.
Disable
Disables the Bonjour (mDNS).
Enable*
Enables the Bonjour (mDNS).
Specifies the IP address which you want to control the access to your printer.
Sets the subnet mask for the specified IP address.
OFF*
Selects whether to accept or reject the access from the
specified IP address.
Accept
Reject
Enables the wireless connection.
Disables the wireless connection.
Using the Operator Panel Menus
170