Table 4-8. Clock Generator Configuration - AMD Geode SC1200 Data Book

Processor
Table of Contents

Advertisement

General Configuration Block
4.5.7
Clock Registers
The clock generator and PLL registers are described in Table 4-8.
Bit
Description
Offset 10h
This register holds the maximum core clock multiplier value. The maximum clock frequency allowed by the core, is the Fast-PCI clock
multiplied by this value.
7:4
Reserved.
3:0
MCM (Maximum Clock Multiplier). This 4-bit value is the maximum multiplier value allowed for the core clock generator. It
is derived from strap pins CLKSEL[3:0] based on the multiplier value in Table 4-7 on page 85.
Offset 11h
Offset 12h
This register controls operation of the PLLs.
7
Reserved.
6
EXPCID (Disable External PCI Clock).
0: External PCI clock is enabled.
1: External PCI clock is disabled.
5
GPD (Disable Graphic Pixel Reference Clock).
0: PLL2 input clock is enabled.
1: PLL2 input clock is disabled.
4
Reserved.
3
PLL3SD (Shut Down PLL3). AC97 codec clock.
0: PLL3 is enabled.
1: PLL3 is shutdown.
2
FM1SD (Shut Down PLL4).
0: PLL4 is enabled.
1: PLL4 is shutdown, unless internal Fast-PCI clock is strapped to 48 MHz.
1
C48MD (Disable SuperI/O and USB Clock).
0: USB and SuperI/O clock is enabled.
1: USB and SuperI/O clock is disabled.
0
Reserved. Write as read.
Offset 13h-17h
Offset 18h-1Bh
31:24
MFFC (MFF Counter Value).
Fvco
= OSCCLK * MFBC / (MFFC * MOC)
OSCCLK = 27 MHz
23:19
Reserved. Write as read.
18:8
MFBC (MFB Counter Value).
Fvco
= OSCCLK * MFBC / (MFFC * MOC)
OSCCLK = 27 MHz
Note:
Bits 18, 9, and 8 cannot be changed. Bit 18 is always a 1; bits 9 and 8 are always 0.
7
Reserved. Write as read.
6
Reserved. Must be set to 0.
5:0
MOC (MO Counter Value).
Fvco
= OSCCLK * MFBC / (MFFC * MOC)
OSCCLK = 27 MHz
AMD Geode™ SC1200/SC1201 Processor Data Book

Table 4-8. Clock Generator Configuration

Maximum Core Clock Multiplier Register - MCCM (RO)
Reserved - RSVD
PLL Power Control Register - PPCR (R/W)
Reserved - RSVD
PLL3 Configuration Register - PLL3C (R/W)
32579B
Reset Value: Strapped Value
Reset Value: 2Fh
Reset Value: E1040005h
87

Advertisement

Table of Contents
loading

This manual is also suitable for:

Geode sc1201

Table of Contents