↑↓→← : Move Enter: Select +/-/: Value F10: Save ESC:Exit F1:General Help
F5: Discard Changes F6:Fail-Safe Defaults F7: Optimal Defaults
GART Error Reporting
The optional settings are : Enabled ; Disabled.
Microcode Update
The optional settings are : Enabled ; Disabled.
CE1 Support
The optional settings are : Enabled ; Disabled.
CPU Prefetching
The optional settings are : Enabled ; Disabled.
3-6
Advanced Chipset Features
The Advanced Chipset Features Setup option is used to change the values of the chipset
registers. These registers control most of the system options in the computer.
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
Memory Configuration
PCI Express Configuration
↑↓→← : Move Enter: Select +/-/: Value F10: Save ESC:Exit F1:General Help
F5: Discard Changes F6:Fail-Safe Defaults F7: Optimal Defaults
3-6-1 Memory Configuration
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
DRAM Timing Mode
Memory CLK:
CAS Latency (Tcl):
RAS/CAS Delay(Trcd):
Row Precharge Time(Trp):
Min Active RAS(Tras):
RAS/RAS Delay (Trrd)
Row Cycle(Trc)
Write Recover Time(Twr)
Bank Interleaving
Enabled clock to AC1 DIMMs
Mem CLK Tristate C3/ATL VID
Memory Hole Remapping
DCI Unganged Mode
Power Down Mode
↑↓→← : Move Enter: Select +/-/: Value F10: Save ESC:Exit F1:General Help
F5: Discard Changes F6:Fail-Safe Defaults F7: Optimal Defaults
Bank Interleaving
Use this item to enable bank memory interleaving.
Advanced Chipset Features
Press Enter
Press Enter
Memory Configuration
Auto
: 400MHz
:5.0
:5 CLK
:5 CLK
:18 CLK
:3 CLK
:24CLK
:6 CLK
Auto
Disabled
Disabled
Enabled
Always
Disabled
25
Help Item
Help Item
Options
AUTO
DCT0