Optical Disk Drive - Packard Bell EasyNote SL Disassembly Manual

1010101010
Note: There are two antenna cables connected to the wireless LAN adapter. The black antenna cable is
connected to MAIN (1) connector and the white antenna cable is connected to AUX (2) connector.
4. Remove the screw securing the wireless LAN; the adapter will eject upwards.
5. Take out the wireless LAN adapter from the socket.

Optical Disk Drive

To remove the optical disk drive, first remove the battery (see
the following steps:
1. Remove the two screws securing the optical disk drive.
2. Use the emergency eject hole to open the optical disk drive.
3. Pull the tray and take out the optical disk drive from the drive bay.
Fig. 13 Removing screw securing WLAN adapter.
Fig. 14 Removing screws securing optical disk drive.
Packard Bell EasyNote SL Disassembly Manual
Battery on page 4) and then perform
10