Touchpad; Lcd Assembly - Packard Bell EasyNote SL Disassembly Manual

1616161616
4. Remove the twenty screws securing the top cover.
5. Turn the notebook upside down again and remove the top cover.

Touchpad

To remove the touchpad module, first remove the top cover (see
do the following:
1. Disconnect both flat cables from the headers on the touchpad module.
2. Remove the two screws securing the touchpad module to the top cover (see
3. Remove the touchpad module.

LCD Assembly

To disassemble the LCD assembly, first remove the top cover (see
then perform the following steps:
Fig. 25 Location of top cover screws.
Fig. 26 Disconnecting touchpad cables.
Packard Bell EasyNote SL Disassembly Manual
Top Cover on page 14), and then
Fig.
Top Cover on page 14), and
16
26).