Lcd Cable; Wireless Lan Antenna - Packard Bell EasyNote SL Disassembly Manual

2525252525

LCD Cable

To remove the LCD cable, first remove the LCD panel (see
the following:
1. Detach any adhesive tape glued to the LCD panel.
2. Disconnect the flexible LCD cable from the LCD panel (see

Wireless LAN Antenna

To remove the wireless antenna, first remove the LCD panel (see
then do the following:
1. Remove the screw securing the wireless LAN antenna cable on the left and right upper part
of the LCD housing.
2. Clear the antenna cable from the shielding foil in the LCD housing.
3. Remove the wireless LAN antenna cable.
Fig. 43 Location of protective tape.
Fig. 44 Location of wireless LAN antenna screws.
Packard Bell EasyNote SL Disassembly Manual
LCD Panel on page 24), and then do
Fig. 43).
LCD Panel on page 24), and
25