Power Connector; Cpu Fan And Heat Sink - Packard Bell EasyNote SL Disassembly Manual

2020202020

Power Connector

To remove the power connector, first remove the top cover (see
perform the following steps:
1. Carefully disconnect the power cable from the header on the main board.
2. Remove the screw securing the short black cable.
3. Remove the screw securing the power connector to the casing (see
4. Remove the power connector and the cable.

CPU Fan and Heat Sink

To remove the CPU fan and heat sink, first remove the top cover (see
then perform the following steps:
Fig. 33 Disconnecting power cable.
Fig. 34 Location of power connector screws.
Packard Bell EasyNote SL Disassembly Manual
Top Cover on page 14), and then
Fig. 34).
Top Cover on page 14) and
20