Removing The Optical Disk Drive - Packard Bell NEC Versa E680 Disassembly Manual

Removing the optical disk drive

To remove the ODD, first remove the battery (see
following steps:
1. Remove the screws retaining the optical drive as shown in Fig. 13
2. Carefully open up small gap between top cover and bottom cover. Hock on the ODD bezel
and carefully remove ODD
Note 1: You might loosen only all screws marked as B instead of remove it.
Note 2: When assemble the ODD, you might put a tine cardboard on the ODD before insert it to base
unit. It will easy the ODD installation
Note 3: You consider removing Bottom Cover before remove ODD.
Fig. 13 Releasing the optical drive
NEC Versa E680/PB EasyNote E5 Disassembly Manual
Removing the Battery), then perform the
A = M4.5x3.5
Black
B = M6x2.5 Black
Page 12