Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Packard Bell EasyNote S
Summary of Contents for Packard Bell EasyNote S
- Page 1 Packard Bell EasyNote S Disassembly Manual...
-
Page 2: Table Of Contents
Removing the LCD Switch Removing the Subwoofer Removing the Speakers Removing the Glide Pad Removing the Microphone Removing the LCD Assembly Removing the LCD Panel Removing the Inverter Board Removing the WiFi Antenna Reassembly Notes Notice Packard Bell EasyNote S Disassembly Manual... -
Page 3: Overview
Furthermore, the screws that are removed are shown next to the image of the parts themselves. Packard Bell reserves the right to make changes to the EasyNote S without notice. Technician Notes Only technicians authorized by NEC Computers International B.V. -
Page 4: Hazardous Voltage
Non personal injury. Always return a defective power avviare il sistema senza aver prima messo supply to your dealer. a posto il coperchio. Packard Bell EasyNote S Disassembly Manual... -
Page 5: Removing The Battery
Removing the Battery Perform the following steps to remove the battery: 1. Make sure to power off the EasyNote S. 2. Disconnect the AC adapter (and all other peripherals) from the unit. 3. Turn the unit upside down. 4. Unlock the battery compartment and slide it out of its place. -
Page 6: Removing The Memory Module
1. Remove the screw securing the cover on the bottom of the casing. Fig. 4 Removing the cover screw. 2. Remove the cover. 3. Push plastic clips aside. 4. Take out the SO-DIMM memory module. Fig. 5 Taking out the memory module. Packard Bell EasyNote S Disassembly Manual... -
Page 7: Removing The Optical Disk Drive
To remove the button panel (hinge and keyboard cover), perform the following steps: 1. Use a small flat-bladed screwdriver to lift the hinge/keyboard cover gently; There are 2 indicated gaps. Fig. 7 Lifting the hinge/keyboard covers. Packard Bell EasyNote S Disassembly Manual... -
Page 8: Removing The Keyboard
To remove the heat shield, first remove the button panel (see Removing the Button Panel) and remove the keyboard (see Removing the Keyboard), then perform the following steps: 1. Remove the 8 screws retaining the heat shield. Packard Bell EasyNote S Disassembly Manual... -
Page 9: Removing The Wlan Mini-Pci Card
Removing the WLAN Mini-PCI Card To remove the WLAN mini-PCI card, first remove the heat shield (see Removing the Heat Shield), then perform the following steps: 1. Disconnect the 2 antenna connectors ( MAIN Packard Bell EasyNote S Disassembly Manual... -
Page 10: Removing The Cpu
Fig. 12 CPU heat sink & VGA heat sink. 2. Remove the CPU heat sink: Loosen the 3 screws in indicated order as marked on the heat sink (1, 2, 3 on Fig. 13). Packard Bell EasyNote S Disassembly Manual... -
Page 11: Removing The Vga Heat Sink
1. Remove the flat cable, next to the LCD cable. You might have removed the flat cable together with the button panel. 2. Remove the 2 hex-bolts adjacent to the VGA port. 3. Remove the 4 screws indicated on Fig. 14. Packard Bell EasyNote S Disassembly Manual... - Page 12 Fig. 15 10 Large screws (A) and 1 short screw (B). 5. Disconnect the flat cable of the glide pad and disconnect the microphone cable. Fig. 16 Glide pad flat cable and the microphone cable. Packard Bell EasyNote S Disassembly Manual...
-
Page 13: Removing The Modem
To remove the modem, first remove the main board (see up to step 6 in Removing the Main Board) then perform the following steps: 1. Remove the screw securing the modem. Fig. 18 Removing the modem screw. Packard Bell EasyNote S Disassembly Manual... -
Page 14: Removing The Lcd Switch
Removing the Subwoofer To remove the subwoofer, first remove the main board (see up to step 6 in Removing the Main Board), then perform the following steps: 1. Disconnect the subwoofer cable from the main board. Packard Bell EasyNote S Disassembly Manual... -
Page 15: Removing The Speakers
1. Remove the 2 screws of the left speaker and the 2 screws of the right speaker. Fig. 22 Removing the left and right speaker screws. 2. Remove the speaker cable from the metal clips (in base). To do so, bend the metal. Packard Bell EasyNote S Disassembly Manual... -
Page 16: Removing The Glide Pad
4. Lift the panel away and disconnect the flat cables. 5. For the glide pad surface: Remove the flat cable coming from the button panel. 6. Push out the glide pad, which has been glued to the top cover. Removing the Microphone Packard Bell EasyNote S Disassembly Manual... -
Page 17: Removing The Lcd Assembly
3. Remove the 2 screws in the bottom base, directly under the screws you removed on the back. 4. Carefully lift out the entire LCD panel. Removing the LCD Panel To remove the LCD panel, first remove the LCD assembly (see Removing the LCD Assembly), then Packard Bell EasyNote S Disassembly Manual... - Page 18 3. Remove the LCD bezel. The bezel has been clicked into place and you need to pull hard to loosen it. 4. Disconnect the cables from the inverter board. Fig. 28 Power cable connected to the inverter board. Packard Bell EasyNote S Disassembly Manual...
-
Page 19: Removing The Inverter Board
Removing the Inverter Board To remove the inverter board, first remove the LCD panel (see up to step 4 in Removing the LCD Panel), then perform the following steps: 1. Remove the screw securing the inverter board. Packard Bell EasyNote S Disassembly Manual... -
Page 20: Removing The Wifi Antenna
2. Release the WiFi antenna and remove it from the back cover. Reassembly Notes To clip the keyboard in place, you have to insert the keyboard/hinges cover into the metal clips mounted on the heat shield. Insert the hinge-side last. Packard Bell EasyNote S Disassembly Manual... -
Page 21: Notice
DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. Copyright © 2005 NEC Computers International B.V. All rights reserved. Packard Bell is a trademark of NEC Computers International B.V. The names of actual companies and products mentioned herein may be trademarks and/or registered trademarks of their respective owners.