15. Remove the screws (3x D, 1xA) from the left LCD bracket. The same
goes for the right bracket.
16. Take away the top, left and right bracket from the LCD display panel.
17. Remove the screws (2xD) holding the wireless antenna and take
away the antenna.
Optical Disk Drive
To remove the optical disk drive follow the steps below:
1. Remove the screws (1xB, 1xJ) and push the optical disk drive out of
its bay.
Fig. 16
LCD display cable.
Fig. 17
Wireless antenna.
Fig. 18
The screws of the optical disk drive.
10