Packard Bell EasyNote SL Disassembly Manual page 9

88888
Remove the two screws securing the memory compartment.
1.
Lift the cover upwards from the left. There are three tabs holding the cover in place on the
2.
right. Raise the cover until you can remove it from the casing (see
Release the metal clip on each side securing the memory module; the module will eject
3.
upwards.
Fig. 9 Removing memory compartment cover.
Fig. 10 Removing memory module.
Packard Bell EasyNote SL Disassembly Manual
Fig. 9).
8