Removing the Optical Disk Drive
To remove the optical disk drive, first remove the battery (see
keyboard (see
Removing the
1. Remove the 2 screws securing the optical disk drive.
2. Flip over the unit, open the LCD and push the optical disk drive module out from the base unit.
Removing the LCD Module
To remove the LCD module, first remove the battery (see
(see
Removing the
Keyboard), then perform the following steps:
1. Remove the 6 screws securing the heat plate.
Fig. 9 Disconnecting the flat cable.
Keyboard), then perform the following steps:
Fig. 10 Releasing the optical disk drive.
Fig. 11 Pushing the optical disk drive out.
Packard Bell EasyNote L Disassembly Manual
Removing the
Battery) and remove the
Removing the
Battery), remove the keyboard
7