Table of Contents
Advertisement
SKIN TONE DTL
Items/
Adjustable
Data Saved
Range
SKIN TONE
OFF
DTL
A
B
AB
S C U F R
ZEBRA VF
ON
OFF
S C U F R
ZEBRA SDI
ON
OUT
OFF
S C U F R
ZEBRA
ON
MONI
OFF
S C U F R
DETECT
A
TABLE
B
S C U F R
SKIN TONE
GET
– – – – –
SKIN DTL
0
EFFECT
:
16
:
S C U F R
31
Y MAX
000
:
190
:
S C U F R
255
Y MIN
000
:
010
:
S C U F R
255
I CENTER
000
:
035
:
S C U F R
255
I WIDTH
000
:
055
:
S C U F R
255
174
Menu: Menu Description Tables
Remarks
For selecting the skin color table for
enabling the skin tone detail.
The skin color table is provided in the
DETECT TABLE item.
By enabling the skin tone detail, it is
possible to shoot human skin more
accurately.
For the setting to display the zebra
pattern in the skin tone area displayed in
the viewfinder screen.
The zebra pattern is displayed when this
item is turned "ON" and the <SKIN TONE
DTL> screen is opened.
The zebra pattern indicates the area
which is selected in the SKIN TONE DTL
item.
For setting to include the skin tone zebra
in the SDI OUT signal.
The zebra pattern is displayed when this
item is turned "ON" and the <SKIN TONE
DTL> screen is opened.
The zebra pattern indicates the area
which is selected in the SKIN TONE DTL
item.
For setting to include the skin tone zebra
in the MON OUT signal.
The zebra pattern is displayed when this
item is turned "ON" and the <SKIN TONE
DTL> screen is opened.
The zebra pattern indicates the area
which is selected in the SKIN TONE DTL
item.
For selecting the skin color table for
subjects to which the skin tone table
applies.
For fetching the color information of A or
B, which is selected in the DETECT
TABLE item, near the center marker.
When this function is executed, data from
I CENTER to Q PHASE are fetched
automatically.
The fetched data will be the table data of
A or B, which is selected in the DETECT
TABLE item.
It is impossible to obtain color information
of both A and B at the same time.
For setting the effect level of the skin tone
detail.
For setting the maximum value of
brightness for enabling the skin tone.
For setting the minimum value of
brightness for enabling the skin tone.
For setting the center position on the I
axis (for setting an area that enables skin
tone.)
For setting the area width for enabling the
skin tone on the I-axis of which the center
is the I CENTER.
Items/
Adjustable
Data Saved
Range
Q WIDTH
00
For setting the area width for enabling the
skin tone on the Q-axis of which the
:
10
center is the I CENTER.
:
S C U F R
90
Q PHASE
–180
For setting phases of the area for
enabling skin tone as setting the standard
:
+000
to the Q-axis.
:
S C U F R
+179
R-Y
Q-WIDTH
I-WIDTH
+ direction
I-CENTER
–
direction
Q-PHASE
Note
The items indicated by
MENU SW( ) R/W in the <SD CARD R/W SELECT> screen.
The items without
are the setting items for PAINT MENU
LEVEL R/W.
> [SD CARD R/W SELECT] (page 193)
The
SKIN TONE DTL item operates separately from the
details set in the LOW SETTING, MID SETTING, HIGH
SETTING, ADDITION DTL, and CAMERA SETTING items.
KNEE/LEVEL
Items/
Adjustable
Data Saved
Range
MASTER PED –200
Set the master pedestal.
:
+015
:
S C U F R
+200
MANUAL
ON
Set the mode when the AUTO KNEE
KNEE
OFF
switch is OFF. The KNEE MASTER
POINT/SLOPE set value is enabled when
this setting is ON.
S C U F R
KNEE
70.0%
For setting the knee point position in
MASTER
increments of 0.5% steps.
:
93.0%
POINT
:
S C U F R
107.0%
KNEE
00
For setting the inclination of the knee.
MASTER
:
85
SLOPE
:
S C U F R
99
WHITE CLIP ON
Set the WHITE CLIP feature to ON or
OFF
OFF. The WHITE CLIP LVL set value is
enabled when this setting is ON.
S C U F R
WHITE CLIP
90%
Set WHITE CLIP LEVEL.
LVL
:
109%
S C U F R
Remarks
Y-MAX
B-Y
Y-MIN
= SKIN TONE AREA
are the setting items for PAINT
Remarks
Y
0
Advertisement
Table of Contents
