Table of Contents
Advertisement
Updating the Firmware
incorporated into the unit
The firmware can be updated using either of the following two methods.
1.
Checking the current version of firmware and performing the update using the dedicated tool
(P2_Status_Logger)
PASS (P2 Asset Support System) is only available to customers who have completed customer registration with
Panasonic.
Log in to PASS and use the dedicated tool (P2_Status_Logger) to check the version information of the firmware on the
unit and download links to pages containing the necessary firmware. For further information about downloading and using
P2_Status_Logger, log in to PASS and refer to the relevant pages. Besides access to PASS, completing customer
registration has a number of other benefits. For further details, refer to the PASS (P2 Asset Support System) website
(http://pro-av.panasonic.net/).
2.
Checking the current version of the firmware using the unit and performing the update
Check firmware version of the camera in the DIAGNOSTIC screen. Then access the site listed in the NOTE below to
check the most recent firmware information and download any firmware you require.
Notes
The update is completed by loading the downloaded file onto the unit via an SD memory card. For details on updating, visit the
support desk at the following website.
http://pro-av.panasonic.net/
Be sure to use a compatible SD memory card. The unit is compatible with SD memory cards based on the SD and SDHC
standards. Also, be sure to format the memory card using the unit before use.
Updating the Firmware incorporated into the unit
199
Advertisement
Table of Contents
