Preparing For Audio Input - Panasonic P2HD AJ-HPX3100G Operating Instructions Manual

Take the following steps to prepare the camera for connecting audio input devices.
When Using the Front Microphone
AJ-HPX3100 can be equipped with the AJ-MC900G stereo
microphone kit (an extra-cost option).
1
Open the microphone holder.
2
Mount the microphone and tighten the
clamping screw.
The microphone must be attached with the UP mark on
the microphone facing up.
Clamping Screw
When Using a Wireless Receiver
When Using the Unislot Wireless Receiver
1
Remove the cover to insert the wireless
receiver and secure it with the screws.
2
Set the AUDIO IN switch to [W.L.] depending
on the audio channel to be recorded.
114
Preparation: Preparing for Audio Input

Preparing for Audio Input

3
Connect the microphone cable to the MIC IN
jack on the camera.
MIC IN Jack
4
Set the AUDIO IN switch to [FRONT]
depending on the audio channel to be
recorded.
3
When using a 2-channel wireless receiver,
select "DUAL" in the WIRELESS TYPE menu
item.
The menu item is found in the <MIC/AUDIO> screen
on the MAIN OPERATION page.
AUDIO IN
Switch