Table of Contents
Advertisement
A shot mark is added to the thumbnail of a clip to distinguish
that clip from others. With the LCD monitor, only clips that
have shot marks can be viewed and/or played back.
Adding Shot Marks
To add a shot mark during recording, press the SHOT MARK
button. The viewfinder displays "MARK ON" and adds a shot
mark to the thumbnail of the appropriate clip. Another press
of the button erases the shot mark.
When the SHOT MARK button is pressed during a recording
pause, a shot mark is attached to the clip recorded
immediately before. The shot mark can be deleted with
another press.
Recording Setting and Operation Mode
AJ-HPX3100 recording mode works according to the priorities outlined in the following table, relative to the setting of the
menus and switches.
Menu switches related to system/recording
Functional
operation
mode
REC SIGNAL
SDI input
SDI
record
INTERVAL
REC
LOOP REC
CAM
ONE CLIP
REC
Normal
Recording
*
Disabled for color bars
46
Recording and Playback: Shot Mark Function
Shot Mark Function
SHOT MARKER
button
INTERVAL
LOOP REC
REC MODE
MODE
Disabled
Disabled
ON or
OFF
ONE SHOT
OFF
ON
OFF
OFF
OFF
OFF
Shot marks may also be added or erased using clip
thumbnails.
> [Shot Mark] (page 123)
Notes
When the color bar is output or the unit is in LOOP REC
mode and INTERVAL REC mode, it is impossible to add/
delete shot marks.
It is impossible to add shot marks to incomplete clips (refer
page 120).
For clips recorded on plural P2 cards or clips split on a P2
card (refer to Note on page 11), a shot mark is added to the
top clip only.
Limitations on various functions
ONE CLIP
REC FORMAT
REC MODE
CAMERA MODE
Disabled
(recording
Disabled
mode is 60i or
50i)
Only 60i, 50i,
OFF
30P
(Over60i),
25P (Over50i)
OFF
are available
ON
All modes are
available (no
limitations)
OFF
PRE
Recording a
RECORDING
Text Memo
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled*
Enabled
1s - 8s/15s
Enabled*
Shot Mark
Enabled
Disabled
Disabled
Enabled*
Enabled*
Advertisement
Table of Contents
