Table of Contents
Advertisement
Information Item
1. System mode
1080-59.9i
1080-50i
480-59.9i
576-50i
2. Camera mode
60i
30P
24P
24PA
50i
25P
3. REC FORMAT
AVC-I 100
AVC-I 50
DVCPRO HD
DVCPRO50
DVCPRO
DV
4. Shutter speed/mode
11/¢¢.¢/1¢¢¢.¢d
1/60 (1/100) - 1/2000, HALF,
¢¢¢.¢d
5. P2 card remaining
¢¢¢min
free space
END
WP
LOOP
INFO P2
¢/¢
6. P2 card remaining
[1]
¢¢¢min
free space
(MODE CHECK)
7. Camera-recorder REC
REC
indication
8. Battery type
DIONIC90 - AC ADPT
(MODE CHECK)
9. Battery remaining
¢¢.¢V
level/voltage
¢¢¢%
EMP
MAX
Indication
This indicates the mode that the unit operates in.
1080-59.94 interlace mode
1080-50 interlace mode
480-59.94 interlace mode
576-50 interlace mode
This indicates the video system when signals output from CCD are recorded
on a P2 card or output as video signals.
1080-59.94i or 480-59.94i
1080-29.97P or 480-29.97P
1080-23.98P or 480-23.98P (2-3 Pull-down)
1080-23.98P or 480-23.98P (2-3-3-2 Pull-down)
1080-50i or 576-50i
1080-25P or 576-25P
Note
In AVC-Intra format, it becomes Native recording for 30P, 24P, and 25P.
This indicates the recording mode.
This indicates that the shutter speed is set to SYNCHRO SCAN.
This indicates that a fixed shutter speed has been set.
The indication "¢¢¢min" stays illuminated under normal conditions or blinks
when the remaining level is near zero.
When the card space is used up, "END" blinks.
The P2 card is write-protected.
The camera-recorder is in LOOP REC mode. When loop recording cannot be
performed, for example because the P2 card has no free space, the indication
blinks.
P2 card being recognised.
Total free space/capacities of the P2 cards (when MODE CHECK is being
performed).
Note
When the menu item P2 CARD REMAIN is set to "ONE CARD", the number of
the P2 card slot that contains the target card is indicated, together with the
remaining space. The menu item P2 CARD REMAIN is found in the <VF
INDICATOR> screen on the VF page.
> [P2 Card Remaining Free Space/capacity Indication] (page 83).
The number of the P2 card slot that contains the target card and the remaining
free space (when MODE CHECK is being performed) are indicated. This item
displays the estimated recording time (Refer to [Loop Recording] (page 39))
when in LOOP REC mode. This indication also appears when the target P2
card has been switched with a user button.
This is displayed when the menu item REC TALLY of the is set to "CHAR".
The menu item REC TALLY is found in the <OPTION MODE> screen on the
SYSTEM SETTING page.
This is displayed when the menu item REC STATUS is set to "ON". The
menu item REC TALLY is found in the <VF INDICATOR> screen on the VF
page.
Battery type, selected through a menu option. "AC ADPT" indicates when an
external DC power supply has been input.
Battery remaining level in tenths of a volt
The remaining battery level is indicated in percentage.
This indicates that the battery level is empty.
This indicates the battery is fully charged.
Adjustments and Settings for Recording : Viewfinder Screen Status Displays
Status
77
Advertisement
Table of Contents
