Controller components and options
Controller components
Sun Blade workstation
Sun Blade 1000/
2000 configuration
2-2
The controller consists of a specially-configured Sun workstation
and uses proprietary Xerox hardware, firmware, and software.
Your controller has one of two possible configurations, described
in the following sections.
NOTE: Controller hardware configurations are subject to
change, to keep up with technology advances.
The controller is based on either the Sun Blade 1000/2000 or the
Sun Blade 2500, workstations with high-performance
architecture for complex processing tasks.
Figure 2-1. Sun Blade 1000/2000 controller
1. Controller stand
2. Mouse
3. 18/36-track cartridge tape drive (optional)
4. Processor
Installation Planning Guide