Xerox DocuPrint 100 Installation Planning Manual page 76

Printer requirements and specifications
Service access
6-12
The following figure provides space planning information and
service access requirements for the bypass transport.
Figure 6-7. Bypass transport space planning diagram (top
view)
1. Recommended third-party feeder hardware attaches at rear
of printer
2. Expected third-party input paper feed path
3. Neutral area, to remain unoccupied
4. Shaded areas at rear and right side of the bypass transport
require third-party input/output devices to be undockable
from the feeder/stacker or the bypass transport
5. Register edge of the output sheet
6. Third-party hardware must not extend more than 1 inch /
25 mm beyond bypass transport front cover line for correct
front door access
Installation Planning Guide