Canon FAX-L220 User Manual page 154

Messsage
CHK SUBADDR/PSWD
CLEAR PAPER JAM
DOC. TOO LONG
ECM RX
ECM TX
LOAD PAPER
MEMORY FULL
13 10 Troubleshooting
Error Code Cause
#083/12 You attempted to send a
document or poll another
fax machine with the
incorrect subaddress and/or
password.
— There is a paper jam.
#003 The document is longer
than 1 metre.
— The unit is receiving a fax
using Error Correction
Mode (ECM).
— The unit is sending a fax
using Error Correction
Mode (ECM).
— The multi purpose tray is
empty.
#037 The unit's memory is full
because it has received too
many documents, or a very
long or detailed document.
The unit's memory is full
because you tried to send or
copy too many pages at
once, or a very long or
detailed document.
Action
Contact the other party to check their
settings. Change your settings if
necessary ( pp. 6 3, 6 7, 9 9).
Clear the paper jam (
then reload paper in the multi
purpose tray ( p. 2 15).
Use a copier to make a reduced copy
of the document and then send the
copy.
Receiving with ECM may take longer
than normal receptions. Turn off
ECM if you need to receive quickly,
or if you know your local lines are in
good condition (
ECM RX,
p. 14 7).
Sending with ECM may take longer
than normal transmissions. Turn off
ECM if you need to transmit quickly,
or if you know your local lines are in
good condition (
ECM TX,
p. 14 6).
Load paper in the multi purpose tray
( p. 2 15), then press Stop.
Print any documents stored in
memory ( p. 9 5). Then start
again.
Divide the document and send or
copy each part separately. To free up
space in the unit's memory, print,
send, or delete any documents in
memory you no longer need
( p. 9 4).
p. 13 3),
Chapter 13