If FAX ONLY MODE does not appear in the LCD when you press Receive Mode,
follow this procedure to set this mode:
1
Press Function.
2
Press Data Registration.
3
Press OK.
4
Use
5
Press OK.
6
Use
7
Press OK.
8
Use
9
Press OK.
10
Press Stop to return to standby mode.
11
Confirm that FaxOnly is displayed in the
LCD.
•
If FaxOnly is not displayed, follow
steps 1 to 2 on page 8 2 to select FAX
ONLY MODE. After a few seconds, the
LCD returns to standby mode.
The FAX treats all incoming calls as fax calls. It receives faxes automatically and
disconnects any voice calls.
The FAX does not ring when it receives a fax call. If you want to be alerted when a
fax call is received, connect the optional handset or a telephone to the FAX, and
enable the INCOMING RING setting (
rings before the FAX answers (
Chapter 8
or
to select RX SETTINGS.
or
to select RX MODE.
or
to select FAX ONLY MODE.
RING COUNT, p. 14 7).
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX/TEL AUTO SW
FAX ONLY MODE
INCOMING RING
Ex:
15:00
Ex:
15:00
p. 14 7). You can also select the number of
Receiving Faxes
FaxOnly
FaxOnly
8 3