Sending A Document Stored In Memory - Canon FAX-L220 User Manual

Sending a Document Stored in Memory

Follow this procedure to send a document received in memory:
1
Press Function.
2
Press Memory Reference.
3
Use
4
Press OK.
5
Use
(TX/RX NO.) of the document you want to
send.
•
•
•
6
Press OK.
7
Enter up to 116 fax numbers you want to send
to using any of the following methods:
❏ One touch speed dialling:
❏ Coded speed dialling:
9 6 Special Features
or to select RESEND DOCUMENT.
or to select the transaction number
If you are unsure of the transaction
number (TX/RX NO.), print the DOC.
MEMORY LIST (
A "#" before the transaction number
(TX/RX NO.) indicates that that
document is being sent or printed at that
moment, and can therefore not be
selected.
Use or to display details of the
transaction (e.g. destination).
Press the one touch speed dialling
button(s) you want.
Press Coded Dial, then use the numeric
buttons to enter the two digit code you
want. Repeat for other codes.
• Be sure to press Coded Dial before
each code.
p. 9 4).
DOC. MEMORY LIST
RESEND DOCUMENT
Ex:
TX/RX NO.
Ex:
TX/RX NO. #5 _ 003
SELECT LOCATIONS
TEL=
Ex:
TEL=905 795 1111
Ex:
01
Ex:
TEL=03 3758 2111
Chapter 9
0 _ 001