Making An Announcement Using The Paging Feature; Receiving Calls - Avaya one-X Quick Edition User Manual

Making an Announcement using the Paging Feature

You can use the paging feature to broadcast a message to all of the 4610SW/4621SW IP
telephones making up the one-X Quick Edition network. Certain 4610SW/4621SW IP
telephones can be assigned to specific paging areas if required to broadcast announcements to
those telephones only.
Tip:
If your network includes a G10 PSTN Gateway equipped with an audio amplifier
Tip:
and speaker, the paging feature can be used to broadcast a message through the
speaker at the same time.
For more information, see

Receiving Calls

The display area can display information about incoming calls, including the name and number
of the calling party. The information on display depends on the services offered by your service
provider.
Whenever you receive a call, you can choose to answer the call or ignore it.
Tip:
If you do not want to receive calls, you can activate the do-not-disturb feature.
Tip:
See
To answer an incoming call
1. Perform either of the following steps:
For handset operation, pick up the handset.
●
For hands-free operation, press the Speaker (
●
with the incoming call by pressing the associated Line/Feature ( ) button.
2. To disconnect, either:
Return the handset to its cradle.
●
If you are using the speaker, press the Speaker (
●
If you are using a headset, press the Headset (
●
Avaya one-X Quick Edition Release 1.0.0 Telephone User Guide
Broadcasting Announcements through Paging on page
Enabling/Disabling the Do-Not-Disturb Feature on page 77.
) button or select the line associated
) button.
) button.
March 2006
Receiving Calls
75.
35