Chapter 3: Using Your 4610SW/4621SW IP Telephone
Initiating a Call Manually
The following procedure describes how to initiate a call manually.
Tip:
To call an outside (PSTN) line, dial 9 first.
Tip:
To initiate a call manually
1. Use any of the three methods listed above (handset, Speaker button, or Line/Feature
button) to obtain a dial tone.
2. Press the keys on the dialpad to enter the telephone number or extension of the party that
you want to call.
Tip:
If you are calling an outside line (PSTN number), dial 9 first. You will not hear a
Tip:
dial tone after you press the 9 key. When you enter a number that forwards your
call to the PSTN, pressing the # key on the dialpad speeds up the dialing process.
3. To disconnect, either:
Return the handset to its cradle.
●
If you are using the speaker, press the Speaker (
●
If you are using a headset, press the Headset (
●
Making a Call using the Speaker
The speaker allows you to speak to someone without using the handset. To switch from the
handset to the speaker when the handset is off hook, press the Speaker (
Tip:
You can pre-dial with the handset on-hook—the entered number is dialed
Tip:
automatically when you press the Speaker (
To initiate a call through the speaker
1. Press the Speaker (
2. Press the keys on the dialpad to enter the telephone number or extension of the party that
you want to call. If you are calling an outside (PSTN) line, dial 9 first.
3. To disconnect, press the Speaker (
34
Avaya one-X Quick Edition Release 1.0.0 Telephone User Guide
) button or press a Line/Feature ( ) button.
) button.
) button.
) button.
) button.
) button.
March 2006